Proxmox Network Setup via WiFi
Direct Connection Between Dell and Huawei After installing Proxmox (following the official documentation and community guides), the next step was to access the web interface. Since Proxmox does no...
Souaibou Barry
Building My Homelab
From CCNA Practice to a Realistic Infrastructure For the past two months, I have been practicing networking labs on GNS3 and Packet Tracer as part of my CCNA 200-301 preparation. I worked on many ...
VLAN Trunk Ports and Router-on-a-Stick
Lab Instructions Configure the switch interfaces connected to PCs as access ports in the correct VLAN. Configure the connection between SW1 and SW2 as a trunk, allowing only the ...
VLAN Access Mode
Lab Instructions Configure the correct IP address/subnet mask on each PC. Set the gateway address as the LAST USABLE address of the subnet. Make three connections between R1 and ...
Subnetting VLSM
Lab Instructions Subnet the 192.168.5.0/24 network to provide sufficient addressing for each LAN and the point-to-point connection between R1 and R2. Assign the first usable addr...
PPP Ring Network: IPv4/IPv6 Static Routing and Loop Analysis
Lab Instructions Configure a 5-router ring topology with PPP serial links Implement IPv4 and IPv6 static routing for full connectivity Analyze routing loop behavior with default routes Th...